X-series Spreaders

Unmatched practical performance

The biggest challenge in designing spreaders is its jaw; it must be strong enough and simultaneously have very thin tips at the end of the jaw.

The jaw is the key to a successful action. It has to transfer all of the power of the spreader into a small area. At Resqtec we have done extensive research and tested many designs to be able to offer you the very best jaw there is.

Rotatable jaws

Maximize your squeezing capacity by simply rotating the jaw.

Pulling Performance

Instantly switch to dedicated pulling jaws.

Quick release pin

Quickly and easily detachable jaws.

Optimized tips

Small, optimized tips for increased spreading efficiency.

While spreading the opening increases and the material being spread bends. The teeth at the end of the jaw bite itself into the material providing even better grip

Teeth at end of jaw

The interlocking teeth grab firmly in the material being spread. The result is that the jaws are in the correct position and maximum force is utilized. We found the key is not to have too many or too big-sized teeth.

(INTERLOCKING) TEETH AT BOTH SIDES FOR FIRM, STRONG GRIP

Small tips easily pry themselves into very narrow spaces.

Very small tips at the end

The angle of the slope is designed to allow the best firm grip step-by-step. The result is that the jaw grabs the material firmly to minimize the risk of shooting out.

THE RIGHT SLOPE

X-Series technical specifications

X2 Spreader

Dimensions (L x W x H)	28 3/4″ x 12 1/8″ x 10 1/2″
Operational weight	33.1 lbs
Max. spreading opening	23 7/8″
Max. spreading force at base of arm teeth*	342 kN / 76,885 lbf
Max. spreading force at base of jaw	173.2 kN / 38,937 lbf
Max. spreading force 1″ from tips	83.2 kN / 18,704 lbf
Max. pulling opening	16 3/4″
Max. pulling force	91.2 kN / 20,503 lbf
Max. squeezing force at base of arm teeth*	120.9 kN / 27,179 lbf

X4 Spreader

Dimensions (L x W x H)	32 1/2″ x 13 3/4″ x 12 1/4″
Operational weight	46.7 lbs
Max. spreading opening	27″
Max. spreading force at base of arm teeth*	3,474.0 kN / 780,986 lbf
Max. spreading force at base of jaw	213.6 kN / 48,019 lbf
Max. spreading force 1″ from tips	91.0 kN / 20,458 lbf
Max. pulling opening	21″
Max. pulling force	128.1 kN / 28,798 lbf
Max. squeezing force at base of arm teeth*	289.0 kN / 64,970 lbf

X6 Spreader

Dimensions (L x W x H)	36″ x 13 3/4″ x 12 1/4″
Operational weight	56.2 lbs
Max. spreading opening	31 5/8″
Max. spreading force at base of arm teeth*	2,273.8 kN / 511,171 lbf
Max. spreading force at base of jaw	172.0 kN / 38,667 lbf
Max. spreading force 1″ from tips	87.4 kN / 19,648 lbf
Max. pulling opening	24 7/8″
Max. pulling force	110.6 kN / 24,864 lbf
Max. squeezing force at base of arm teeth*	245.7 kN / 55,236 lbf

*Maximum is a theoretical force. All forces with EN13204 certified power pack with pressure relief valves set conform EN13204 allowable pressure requirements.